Electrolux EI36DD10KS Complete Owner's Guide (English) - Page 9
Plan the Electrical Connection, Install Electrical Supply Outlet
View all Electrolux EI36DD10KS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Planning 9 Plan the Electrical Connection The downdraft blower system draws 4 AMPS and requires a 120 VAC, 60 Hz circuit. The unit has a 28 inch long power cord with a 3 pronged grounded plug. Plan to provide a grounded outlet in a location which will allow the unit's power cord to reach. Install Electrical Supply Outlet - Mount a standard wiring box, with 3-pronged grounded receptacle, inside the cabinet. Make sure the downdraft's power cord can easily reach it. - Run appropriate power cable into cabinet and connect it to receptacle. NOTE If the 30" model is being installed in a 30" wide cabinet or the 36" model in a 36" wide cabinet, the outlet cannot be located on the back wall of cabinet. Outlet may also be wall-mounted with access hole in cabinet. M M 9-1/2" (24.1cm) 23-3/4" (60.3 cm) 22-1/8" (56.2 cm) 19-1/16" (48.4 cm) 4-5/8" (11.8 cm) 14-3/4" (37.5 cm) 8-3/4" (22.2 cm) 7-7/8" (20 cm) 6-1/2" (16.5 cm) Recommended Electrical Outlet Locations (All Shaded Areas) Electrical Outlet Location Model M - From Center EI30DD10SK 13 ½" (34.3 cm) EI36DD10SK 16 ½" (42.0 cm) All vertical dimensions relative to top surface of the countertop. All horizontal dimensions relative to cutout in the countertop. Ensure that access to the electrical outlet will not be blocked by the ducting after installation.