Electrolux EIDW1815US Complete Owners Guide English - Page 15
Before calling, PROBLEM, POSSIBLE CAUSES, SOLUTIONS - review
View all Electrolux EIDW1815US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Troubleshooting 15 Before calling Before calling for service, review this list. If may save you both time and expense. This list includes common experiences that are not the result of defective workmanship or material in your dishwasher. To achieve the best results from your dishwasher, visit www.dishwashingexpert.com for general tips regarding the performance and operation of your dishwasher. PROBLEM POSSIBLE CAUSES SOLUTIONS Dishwasher won't start Dishwasher beeps at the end of the cycle Dishwasher operates too long Dishes are not clean enough • Dishwasher door is open. • Power supply or power line is not connected. • Delay option has been selected. • Control Lock activated (select models). • The wash cycle will beep to indicate the end of the cycle. • The dishwasher is connected to cold water. • The cycle time will vary due to the soil. • The sanitize option is selected. • Water pressure is temporarily low. • The inlet water temperature is low. • Dishes are loaded too close together. • Improper use of detergent. • Shut the door completely make sure it is latched. • Check and connect the power supply. • Refer to the Delay section in this manual to reset. • Deactivate the control lock, refer to Control Lock section in this manual. • Check the dishwasher, make sure it is properly connected to the hot water supply. • When heavy soil is detected, some cycles will automatically increase the cycle time. • When sanitize option is selected, the cycle time will be increase to meet the sanitized temperature request. • Use you dishwasher when the water pressure is normal. • Make sure the dishwasher is connected to the hot water supply Try not use your dishwasher when hot water is being used elsewhere in the house. • Load the dishes again as per the manual. • Add detergent depending on the water hardness and the cycle you chose. Use fresh detergent. • The selected cycle is not suitable for food soil condition. • Spay arms is blocked by some items. • Choose anther cycle for longer washing time. • Make sure the spay arm is rotated freely.