Electrolux EIDW1815US Complete Owners Guide English - Page 17

Troubleshooting 17 PROBLEM POSSIBLE CAUSES SOLUTIONS Noises • Detergent cup opening\ • This is normal. Drain pump sound. • A hard object has entered • If the noise persists after a complete the wash module. When cycle, call for service.X the object is ground up, the sound should stop. Dishwasher • Water valve is turn off. won't fill with • Door latch may not be water properly seated. • Check if the water valve is turn on. • Make sure the door is closed. Error codes Error codes will display on the display window when the following errors occur: CODE i1 i4 id MEANING Longer inlet time Unit leaking PCB communication error POSSIBLE CAUSES Faucets is not opened, or water intake is restricted, or water pressure is too low. Some element of dishwasher leaks. PCB issue, or wire connected to the board issue. CAUTION • If overflow occurs, turn off the main water supply before calling a service provider. • If there is water in the base pan because of an overfill or small leak, the water should be removed before restarting the dishwasher.