Electrolux EW23CS75QS Complete Owner's Guide (English) - Page 13

Installing Door Handles

Get Electrolux EW23CS75QS PDF manuals and user guides View all Electrolux EW23CS75QS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 13 highlights

Door Handle Mounting Instructions 1 Remove handles from protective packaging. 2 Position fresh food handle end caps (A) over upper and lower pre-installed shoulder bolts (B) that are fastened into door, ensuring the holes for the set screws are facing towards the opposite door. 3 While holding handle firmly against door, fasten upper and lower Allen set screws (C) with supplied Allen wrench. 4 Repeat steps 2 and 3 to install opposite handle. Ensure the holes for the set screws are facing towards the first door. 5 Position freezer handle end caps over left and right preinstalled shoulder bolts that are fastened to the drawer, ensuring the holes for the set screws are facing down. 6 While holding handle firmly against drawer, fasten left and right Allen set screws (C) with supplied Allen wrench. Installing Door Handles 13 End Cap End Cap End End Cap Cap Mounting Refrigerator Handles End Cap End Cap Mounting Freezer Handle NOTE To ensure that handles are flush with doors/drawer, make sure that set screws are completely tightened. CAUTION Wear gloves and safety goggles and use extreme CAUTION when installing these handles. The rounded end of the handles may be sharp (some models).

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
13
Installing Door Handles
Door Handle Mounting
Instructions
1
Remove handles from
protective packaging.
2
Position fresh food handle end
caps (A) over upper and lower
pre-installed shoulder bolts
(B) that are fastened into door,
ensuring the holes for the set
screws are facing towards the
opposite door.
3
While holding handle firmly
against door, fasten upper and
lower Allen set screws (C) with
supplied Allen wrench.
4
Repeat steps 2 and 3 to install
opposite handle. Ensure the
holes for the set screws are
facing towards the first door.
5
Position freezer handle end
caps over left and right pre-
installed shoulder bolts that
are fastened to the drawer,
ensuring the holes for the set
screws are facing down.
6
While holding handle firmly
against drawer, fasten left and
right Allen set screws (C) with
supplied Allen wrench.
End
Cap
End
Cap
End
Cap
End
Cap
Mounting Refrigerator Handles
End
Cap
End
Cap
Mounting Freezer Handle
NOTE
To ensure that handles are flush with doors/drawer, make sure that set screws are completely tightened.
CAUTION
Wear gloves and safety goggles and use extreme CAUTION when installing these handles. The rounded
end of the handles may be sharp (some models).