Electrolux Induction/2 Use and Care Guide - Page 25

Care & Cleaning

Page 25 highlights

General Care & Cleaning 25 CARE& CLEANINGTABLE I Surfaces Aluminum & Vinyl Painted and Plastic Control Knobs Stainless Steel, Chrome Control Panel, Decorative Trim How to Clean Use hot, soapy water and a cloth. Dry with a clean cloth. Using a soft cloth, clean with mild dish detergent and water or a 50/50 solution of vinegar and water. Follow by rinsing the area with clean wateq dry and polish with a soft cloth. Glass cleaners may be used if sprayed on a soft cloth first. DO NOT spray liquids directly on the control pad and display area. Do not use large amounts of water on the control panel - excess water on the control area may cause damage to the appliance. Do not use other liquid cleaners, abrasive cleaners, scouring pads, or some paper towels =they will damage the finish. To remove control knobs, turn to the OFF positionl grasp firmly and pull straight off the shaft. To replace knobs after cleaning, line up the flat sides of both the knob and the shaft; then push the knob into place. Clean stainless steel with hot, soapy water and a dishcloth. Rinse with clean water and a cloth. Do not use cleaners _th high concentrations of chlorides or chlorines. Do not use harsh scrubbing cleaners. Only use kitchen cleanersthat are especially made for cleaning stainless steel. Always be sure to rinse the cleaners from the surface as bluish stains may occur during heating that cannot be removed.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

General
Care & Cleaning
25
CARE&CLEANINGTABLE
I
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
Surfaces
Aluminum
& Vinyl
Painted and Plastic
Control
Knobs
Stainless
Steel,
Chrome
Control
Panel, Decorative
Trim
How
to
Clean
Use hot, soapy water and a cloth. Dry with a clean cloth.
Using a soft cloth, clean with mild dish detergent
and water or a 50/50 solution
of vinegar and water.
Follow by rinsing the area with clean wateq
dry and polish
with a soft cloth. Glass cleaners
may be used if sprayed
on a soft cloth first. DO
NOT spray liquids directly
on the control
pad and display
area. Do not use large
amounts
of water on the control
panel - excess water on the control
area may
cause damage to the appliance.
Do not use other liquid cleaners,
abrasive
cleaners,
scouring
pads, or some paper towels
=they will damage the finish. To
remove
control
knobs, turn to the OFF positionl
grasp firmly
and pull straight
off
the shaft. To replace knobs after cleaning,
line up the flat sides of both the knob
and the shaft; then push the knob into place.
Clean stainless
steel with hot, soapy water and a dishcloth.
Rinse with clean water
and a cloth.
Do not use cleaners
_th
high
concentrations
of
chlorides
or
chlorines.
Do not use harsh scrubbing
cleaners. Only use kitchen cleanersthat
are
especially
made for cleaning
stainless
steel. Always
be sure to rinse the cleaners
from the surface as bluish stains may occur during heating that cannot be removed.