Emerson CF152 Owner Manual - Page 7

How to Wire Your Ceiling Fan

Page 7 highlights

How to Wire Your Ceiling Fan If you feel that you do not have enough electrical wiring knowledge or experience, have your fan installed by a licensed electrician. ! WARNING Turning off wall switch is not sufficient. To avoid possible electrical shock, be sure electricity is turned off at the main fuse box before wiring. All wiring must be in accordance with National and Local codes and the ceiling fan must be properly grounded as a precaution against possible electrical shock. CAUTION: To reduce the risk of electrical shock, disconnect the electrical supply circuit before installing the fan, light kit or receiver. NOTE: Make all wiring connections using wire connectors (supplied). Make sure that all connections are tight, including ground, and that no bare wire is visible at the wire connectors, except for the ground wire. 1. Position the receiver into the fan motor housing as shown in Figure 9. 2. Refer to Figures 9 and 10 to connect the receiver wires to the supply wires and the fan motor wires using the wire connectors supplied with the fan as follows: a. Securely connect the green grounding wire from the ceiling mounting plate and green grounding wire from fan body to the supply green grounding conductor (this may be a bare wire or a wire with green insulation). b. Securely connect the supply white (neutral) wire to the receiver white (AC IN N)/(TO MOTOR N) wire and white (neutral) fan wire. c. Securely connect the supply black wire to the receiver black/white (AC IN L) wire. d. Securely connect the fan motor black wire to the receiver black (TO MOTOR L) wire. e. Securely connect the fan motor blue wire to the receiver blue (FOR BOTTOM LIGHT) wire. ! WARNING Check to see that all connections are tight, including ground, and that no bare wire is visible at the wire connectors, except for the ground wire. Do not operate fan until blades are in place. Noise and fan damage could result. FAN ASSEMBLY GREEN WIRE ANTENNA WIRE SUPPLY & CEILING MOUNTING PLATE GREEN WIRES SUPPLY, RECEIVER & FAN WHITE WIRES SUPPLY BLACK WIRE RECEIVER BLACK/WHITE WIRE FAN & RECEIVER BLUE WIRES FAN BLACK WIRE RECEIVER BLACK WIRE RECEIVER Figure 9 RECEIVER WHITE RECEIVER WIRE BLACK RECEIVER WIRE BLACK/WHITE RECEIVER WIRE WHITE FAN WIRE BLACK FAN WIRE GREEN GROUND WIRE BLACK SUPPLY WIRE WHITE SUPPLY WIRE BLUE RECEIVER WIRE BLUE FAN WIRE GREEN MOUNTING PLATE WIRE GREEN FAN WIRE Figure 10 emersonfans.com Please contact 1-800-654-3545 for further assistance 7 U.L. Model No.: CF144 & CF152

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16

7
emersonfans.com
Please contact 1-800-654-3545 for further assistance
U.L. Model No.: CF144 & CF152
If you feel that you do not have enough electrical
wiring knowledge or experience, have your fan
installed by a licensed electrician.
CAUTION: To reduce the risk of electrical shock,
disconnect the electrical supply circuit before
installing the fan, light kit or receiver.
NOTE: Make all wiring connections using wire
connectors (supplied). Make sure that all
connections are tight, including ground, and that
no bare wire is visible at the wire connectors,
except for the ground wire.
1.
Position the receiver into the fan motor housing as
shown in Figure 9.
2.
Refer to Figures 9 and 10 to connect the receiver
wires to the supply wires and the fan motor wires
using the wire connectors supplied with the fan as
follows:
a.
Securely connect the green grounding wire from the
ceiling mounting plate and green grounding wire
from fan body to the supply green grounding
conductor (this may be a bare wire or a wire with
green insulation).
b.
Securely connect the supply white (neutral) wire to
the receiver white (AC IN N)/(TO MOTOR N) wire
and white (neutral) fan wire.
c.
Securely connect the supply black wire to the
receiver black/white (AC IN L) wire.
d.
Securely connect the fan motor black wire to the
receiver black (TO MOTOR L) wire.
e.
Securely connect the fan motor blue wire to the
receiver blue (FOR BOTTOM LIGHT) wire.
How to Wire Your Ceiling Fan
Turning off wall switch is not sufficient. To avoid
possible electrical shock, be sure electricity is
turned off at the main fuse box before wiring. All
wiring must be in accordance with National and
Local codes and the ceiling fan must be properly
grounded as a precaution against possible
electrical shock.
WARNING
!
Check to see that all connections are tight, including
ground, and that no bare wire is visible at the wire
connectors, except for the ground wire. Do not operate
fan until blades are in place. Noise and fan damage
could result.
WARNING
!
FAN BLACK
WIRE
FAN &
RECEIVER
BLUE WIRES
SUPPLY
BLACK WIRE
SUPPLY,
RECEIVER &
FAN
WHITE WIRES
RECEIVER BLACK
WIRE
RECEIVER
RECEIVER
BLACK/WHITE
WIRE
ANTENNA
WIRE
SUPPLY & CEILING MOUNTING
PLATE GREEN WIRES
FAN ASSEMBLY
GREEN WIRE
Figure 9
WHITE
SUPPLY
WIRE
BLACK FAN WIRE
RECEIVER
WHITE FAN WIRE
BLUE RECEIVER WIRE
BLUE FAN WIRE
BLACK
SUPPLY
WIRE
WHITE
RECEIVER
WIRE
BLACK RECEIVER
WIRE
BLACK/WHITE
RECEIVER WIRE
GREEN
GROUND
WIRE
GREEN MOUNTING
PLATE WIRE
GREEN FAN WIRE
Figure 10