Emerson LF320EM5F Owner s Manual - Page 25

Note(s) • Closed Caption will NOT be displayed when you are using an HDMI connection. • Digital caption service that you can switch differs depending on the broadcast description. • Caption Style will not have any effect if the User setting is set to Off. • Closed Captioning Service may not be controlled by this unit's Menu Options if you are watching television through an External Cable or Satellite Set-top Box. In which case you will need to use the Menu Options on the External Set-top Box to control Closed Captioning. • The captions do not always use correct spelling and grammar. • Not all TV Programs and Product Commercials include Closed Caption information or all types of the Closed Captioning. Refer to your area TV program listings for the TV channels and times of Closed Caption shows. The captioned programs are usually noted in the TV listings with abbreviations such as CC. • Not all captioning services are used by a TV channel during the transmission of a Closed Caption program. • To show the Closed Caption on your TV screen, broadcast signal must contain the Closed Caption data. • Captions and Texts may not exactly match the TV voice. • Changing Channels may delay the Closed Caption for a few seconds. • Adjusting or Muting the Volume may delay the Closed Caption for a few seconds. • Abbreviations, symbols and other grammatical shortcuts may be used in order to keep pace with the on-screen action. This is not a malfunction. • The caption or Text characters will not be displayed while the Main Menu or Functions Display is shown. • If a black box appears on the TV screen, this means that the Closed Caption is set to the text mode. To clear the box, select CC-1, CC-2, CC-3, or CC-4. • If the unit receives poor quality television signals, the captions may contain errors or there might be no captions at all. Some possible causes of poor quality signals are: - Automobile ignition noise - Electric motor noise - Weak signal reception - Multiplex signal reception (ghosts or screen flutter) - Data dropout and Pixelation (for DTV only) • The unit retains the Closed Caption setting if the power fails. • When the unit receives special effects playback signal (e.g. Search, Slow and Still) from a VCR's video Output channel (ch3 or ch4), the unit may not display the correct caption or text. • The EUT setting that satisfies § 79.102 (e) is as follows: Font: Mono-font Character size: Large Child and Ratings Lock You can prevent your children from watching certain Programs or certain Channels by locking the TV Controls and by using Ratings. 1 Use ɼɾ to select Child lock, then press OK. Picture Sound Setup Features Language USB Caption settings Child lock PC settings fun-Link (HDMI CEC) Location E-sticker Software upgrade Home - - 2 Use the NUMBER keys to enter the 4-digit numbers for your PIN code. • When you have not set up your PIN code, enter 0, 0, 0, 0. • When the PIN code is correct, Child lock menu is displayed. See the following description for setting each item. Picture Sound Setup Features Language USB Channel lock US movie ratings lock US TV ratings lock Canadian English rating Canadian French rating Region ratings lock Clear region ratings lock Change PIN 25 English Note(s) • When you select a rating and set it to or , the higher ratings will be blocked automatically. The lower ratings will be available for viewing. • When you set the highest rating to , all ratings turn to automatically. • To block any inappropriate programs, set your limits in US movie ratings lock, US TV ratings lock and Region ratings lock. • The Child Lock setting will be retained after a power failure or after the power is removed for longer than 10 seconds (except the PIN code reverts to 0000). Child and Ratings Lock ➟ p.25 • Region ratings lock and Clear region ratings lock will be available when the unit receives a Digital broadcast using the new rating system. • For the United States, the unit may download the Region Ratings Lock Table, if required. • The Canadian rating systems on this unit are based on CEA-766-A and CRTC policy. Channel lock Particular Channels or External Input modes can be invisible in this function. 3 Use ɼɾ to select Channel lock, then press OK. 4 Use ɼɾ to select the particular Channels or External Input, then press OK repeatedly to switch between View and Block. • indicates that the Channel or Input Source is Locked. • indicates that the Channel or Input Source is Not Locked. Picture Sound Setup Features Language USB HDMI1 HDMI2 Video PC 40.1 DTV 40.2 DTV Continued on next page.