Emerson LF501EM6F Owner s Manual - Page 16

4 Use your TV Switching on your TV and putting it in Standby mode TV * Key on Rear Remote Control Switching Channels TV * Key on Rear Remote Control 16 .English To Turn the TV On from Standby or Off to Standby ● Press B on the Rear panel or the Remote Control. Note(s) ● Energy Consumption contributes to air and water pollution. When the AC Power Cord is plugged in, your TV consumes energy with a very low standby Power Consumption. Adjusting Volume TV * Key on Rear Remote Control To decrease or increase Volume ● Press VOL J / K on the Rear panel or press VOL + / - on the Remote Control. VOL J(-) : Volume Down VOL K(+) : Volume Up To mute or unmute sound ● Press D on the Remote Control to mute the sound. ● Press D again or VOL + / - to recover the original sound. To select Channels by using CHI / H or CH + / - ● Press CH I (Down) / H (Up) on the Rear panel or press CH + / - on the Remote Control. To select Channels by using the NUMBER keys Digital TV Operation ● For Digital channels, press a number followed by a dot "•" and the corresponding sub channel number. - When selecting Digital channel 11.1 Be sure to press • before entering the subchannel number. Cable / NTSC (Analog) TV Operation - When selecting Cable or Analog channel 11 Press PREV.CH to return to the previously viewed channel. Note(s) ● To select the non-memorized channels, use the NUMBER keys. ● No signal will appear on the TV screen after the subchannel broadcast is over. ● Audio only program message will appear on the TV screen, when you receive only a sound signal. Continued on next page.