Emerson ZV427EM5 Owner s Manual - Page 35

Introduction Connections Basic Setup Recording SATELLITE LINK You can set the unit to start recording whenever it detects the video signal from the external tuner. Preparing for the satellite link timer recording: Preparation on the tuner • Satellite link accepts only the connection from L1 (rear) with the external tuner. (The connection from L2 cannot read any signals from the external tuner.) • The external tuner should be equipped with some kind of timer function. Using timer function of the tuner, set it to output audio/video signals when it comes to the time you want to start recording, and stop output audio/ video signals when it comes to the time you want to finish recording. Refer to the tuner's manual on how to set the timer. • Make sure to set the satellite link standby mode when you finish setting. 1 Press [SETUP]. 2 Use [K / L] to select "Timer Programming", then press [OK]. 3 Use [K / L] to select "Satellite Link", then press [OK]. Timer Programming Timer Programming Satellite Link 4 Use [K / L] to select the time, media and recording mode, then press [OK]. Satellite Link Start 5:00PM DVD VCR DVD Mode SP To Standby Mode 5 Use [K / L] to set the desired starting time, then press [ B]. • The hour can be selected from 1 to 12 with AM or PM. • Repeat procedures in step 5 to set the desired minutes. • If you wish to go back to the left, press [{]. 6 Use [K / L] to select a recording media ("DVD" or "VCR"), then press [ B]. 7 Use [K / L] to select the recording mode. Refer to page 27 for details. Playback Editing Function Setup VCR Functions Others Español Instructions continue on the next page. EN 35