Emerson ZV427EM5 Owner s Manual - Page 85

DVD • VCR Introduction Connections Basic Setup Recording TROUBLESHOOTING Symptom There is no sound or the sound is distorted. Setup menu cannot be called up. Remedy • The HDMI sound is not output when "HDMI Audio" is set to "OFF". • Check the RCA audio cable connection. If you are using HDMI-DVI conversion cable, you must connect the RCA audio cable, too. • Check whether the output format of this unit (HDMI FORMAT) matches the supported input format of other connected device. • Setup menus cannot be called up during DVD recording or DVD playback. There is no picture. • If the main menu appears on the TV screen, press [RETURN] to exit. • Check if the progressive scan mode is set correctly according to your TV (page 78). Picture noise appears. • Clean the disc with a cleaning cloth. There is no sound. • If you are using DIGITAL AUDIO OUT (COAXIAL) jack, check the setting in "Disc Audio" (pages 75-76). • Clean the disc with a cleaning cloth. Sound is noisy. • Clean the disc with a cleaning cloth. No DTS sound is output. • This unit is not compatible with DTS sound. The disc does not play back. • No disc is inserted. • A blank disc is inserted. • The disc is upside down. Insert the disc with the labeled side facing up. • The disc is not correctly inserted. • The unit cannot play back certain discs (such as a CD-ROM) (page 44). • The region code on the DVD-video does not match the unit (page 44). • Moisture has condensed inside the unit. Remove the disc and leave the unit turned on for about 2 hours until the moisture evaporates (page 3). • If the disc was recorded on another recorder, the unit cannot play back the disc if it was not finalized. Discs recorded on this unit cannot be • If you are using DVD-RW/-R, please ensure you finalized the disc after played back on other DVD players. recording (pages 42-43). The disc does not start playback from • Resume playback was activated (page 50). Press [C] twice. the beginning. • You have inserted a disc whose title menu or DVD menu automatically appears on the TV screen when it is first inserted. The unit starts playing back the disc automatically. • The DVD-video features an auto playback function. Some functions such as stop, search or • Depending on the disc, you may not be able to do some of the slow-motion playback cannot be operations. Refer to the instruction manual supplied with the disc. performed. The language for the sound track cannot be changed. • The title does not have the multilingual audio tracks. • The DVD-video prohibits the changing of the language for the sound track. The subtitle language cannot be changed or turned off. • Multilingual subtitle are not recorded on the DVD-video. The camera angles cannot be changed. • Multi-angles are not recorded on the DVD-video being played back. • The angle-change operation is available whenever the disc contains a multi-angle feature. Actual change will be performed when the feature comes up. • The DVD-video prohibits changing angles. • Try changing the angle using the DVD-video's menu. Recording does not stop immediately • It may take a few seconds for the unit to input disc data before after you press [C]. recording stops. Playback DVD Editing Function Setup VCR Functions Others Español Instructions continue on the next page. EN 85