Emerson ZV427EM5 Owner s Manual - Page 81
VCR Functions, VCR FUNCTIONS, Information on VCR Functions, Playback, Recording
View all Emerson ZV427EM5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Introduction Connections Basic Setup Recording Playback VCR FUNCTIONS Information on VCR Functions Caution on using S-video, component or HDMI connection for VCR: • Only the playback audio / video are available with these connections. • Under the condition listed below, the playback image cannot be viewed. Use the standard video connection, in such case; - during DVD recording. • HDMI video resolution cannot be changed when the unit is in VCR mode. Playback Recording Press [VCR] first. Press [VCR] first. 1) Insert a prerecorded tape (refer to page 24 on "How to Insert a Disc / Cassette Tape"). 2) Press [ B] to start playback. 3) Press [C] to stop playback. To pause playback: Press [F]. Playback will pause and sound will be muted. To resume playback: Press [ B]. Note • When a cassette tape without erase-protection tab is inserted, the unit will start playback automatically. • Tracking will be automatically adjusted upon playback. To adjust the tracking manually, press [TRACKING K / L] on the remote control. • S-VHS cassette tape is not to be used on this unit. • Playback will stop when you change the output mode. 1) Insert a recordable tape with an erase-protection tab intact. Accidental erasure prevention To prevent accidental recording on a recorded cassette tape, remove its erase- protection tab. To record on it later, cover the hole with cellophane tape. erase-protection tab 2) Select the recording mode using [REC MODE]. • The desired recording mode is selected in SP (standard play) or SLP (super long play) mode by pressing [REC MODE]. Recording mode: Tape speed Type of tape SP mode SLP mode Recording / playback time T60 T120 T160 1hour 2hours 2-2/3hours 3hours 6hours 8hours 3) Press [INPUT SELECT] to select the appropriate external input position (L1/L2) to which your external tuner is connected. 4) Press [REC] to start recording. Press [C] to stop the recording. To pause recording: Press [F]. To resume recording: Press [F] or [REC]. After the unit has been in pause mode for 5 minutes, it will stop automatically to protect the tape and the video head from damage. • Refer to pages 31-34 for instructions on "TIMER RECORDING". Note • This function is available only when the unit is connected by the VIDEO OUT jack. Editing Function Setup VCR Functions Others Español EN 81