Epic Fitness El 2980 Elliptical English Manual - Page 6
Patch Screws 48 and four M10 Split Washers
View all Epic Fitness El 2980 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
1. To make assembly easier, read the 1 information on page 5 before you begin. Attach the Stabilizer (8) to the Frame (1) with two M10 x 123mm Button Bolts (38) and two M10 Locknuts (70) (only one is shown). 38 8 Tighten two Leveling Feet (36) into the underside of the Stabilizer (8). 36 1 70 2. Have a second person hold the Upright (2) near the Frame (1) as shown. See the inset drawing. Locate the wire tie in the Upright (2). Tie the lower end of the wire tie to the Wire Harness (77). Next, pull the upper end of the wire tie upward out of the top of the Upright. Then, untie and discard the wire tie. Tip: To prevent the Wire Harness from falling into the Upright, secure the Wire Harness with the wire tie. Tip: Avoid pinching the wires. Insert the Upright (2) into the Frame (1). Attach the Upright (2) with four M10 x 25mm Patch Screws (48) and four M10 Split Washers (85). 2 2 Avoid pinching the wires 85 48 85 Wire Tie 77 77 48 85 1 6