Epson 1430Wi User Manual - Page 66
the Epson USB Display software., USB Display software.
![]() |
View all Epson 1430Wi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Caution: Make sure the control pad is positioned no more than 6.5 ft (2 m) away from the projector, and no obstacles are blocking the signal from the projector. Do not place the control pad behind the projection surface. Note: This also lets you use the interactive pens with your computer. You need to adjust the USB Type B setting in the projector's Extended menu before you can project through the USB port. Note that using USB Display will slow interactive pen function. For the best performance, VGA or HDMI connections are recommended, in addition to the USB connection for interactive pen usage. 1. Turn on your computer. 2. Make sure a USB cable is connected between the USB-B port on the projector and the USB-A port on the control pad. 3. Connect another USB cable to the USB port on the bottom of the control pad and any available USB port on your computer. 4. To use USB Display, do one of the following: • Windows 8.x: Click EPSON_PJ_UD in the upper right-corner, then select Run EMP_UDSe.exe in the dialog box that appears to install the Epson USB Display software. • Windows 7/Windows Vista: Select Run EMP_UDSE.exe in the dialog box that appears to install the Epson USB Display software. • Windows XP: Wait as messages appear on your computer screen and the projector installs the Epson USB Display software on your computer. • Windows 2000: Select Computer, EPSON_PJ_UD, and EMP_UDSE.EXE to install the Epson USB Display software. 66
![](/manual_guide/products/epson-brightlink-pro-1420wi-f39f9c7/66.png)