Epson 1776W EasyMP Network Projection - Operations Guide - Page 17
Connecting to a Projector on a Different Subnet, Specifying Either an IP Address or Projector Name
View all Epson 1776W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Connecting to a Projector on a Different Subnet 17 Connecting to a Projector on a Different Subnet You can connect the projector and the computer and project to screens at remote locations (on different subnets). In Automatic search, projectors on different subnets are not found because searches are only performed on the same subnet. You can use the following methods to connect to a projector on a different subnet. • Specify either an IP address or projector name and perform a search. The IP address can be input directly. Also, provided the projector name to be connected has been registered on the DNS server, you can perform a search simply by inputting that projector name. s "Specifying Either an IP Address or Projector Name and Performing a Search (Advanced Connection Mode Only)" p.17 • Perform a search based on a Profile. Once you have performed a search for a projector on a different subnet by specifying either an IP address or a projector name, you can save the search as a profile with an easy-to-remember name, and then use that profile whenever you subsequently want to search for a projector on a different subnet. s "Performing a Search with a Profile" p.18 q • If you cannot find a projector, see the following section for the most likely causes. s "Troubleshooting" p.40 • When you use Manual search in Quick Connection Mode, you can specify the SSID to narrow the search field. Specifying Either an IP Address or Projector Name and Performing a Search (Advanced Connection Mode Only) In the following explanations, unless otherwise noted, Windows screen shots are used. Similar screens are displayed on Mac OS. A Click Manual search on the EasyMP Network Projection projector selection screen.