Epson 2090 User Manual - Page 28
Loading Special Papers, Continuous multipart forms, Single-sheet multipart forms, Labels
UPC - 010343850064
View all Epson 2090 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Loading Special Papers Follow the guidelines in this section when loading single-sheet multipart forms, labels, envelopes, and postcards. Continuous multipart forms Except for adjusting the paper-thickness lever, you load continuous multipart forms the same way as ordinary continuous paper. Note: ❏ Be sure the multipart forms do not exceed 0.015 inch (0.39 mm) in thickness. ❏ Do not load paper that is curled or has been folded. ❏ Thick paper, such as a multipart form with five parts, requires a straight paper path to avoid paper jams. Load thick paper in the front or bottom slots. Single-sheet multipart forms To load single-sheet multipart forms, use the front paper entry slot with the optional front paper guide or front sheet guide installed. Thick paper, such as a multipart form with five parts, requires a straight paper path to avoid paper jams. For more information, see the Reference Guide. Labels When printing on labels, use only the type of labels that are mounted on continuous backing sheets with sprocket holes for use with a tractor feeder. Do not try to print on single sheets of labels because the printer may not feed labels on a shiny backing sheet properly. Thick paper, such as continuous paper with labels, requires a straight or almost straight paper path. You can load labels in the front (to the pull tractor) or bottom (pull tractor) paper slot. The loading procedure for continuous paper with labels is the same as that for ordinary continuous paper, except you must set the paper-thickness lever to 2 before printing. 28 Paper Handling