Epson 2090 User Manual - Page 36
See Using the Micro Adjust Function on and Tear Off/Bin Set
UPC - 010343850064
View all Epson 2090 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
4 Tear Off/Bin (Set) button Tear Off/Bin lights 5 Menu buttons Menu lights 6 Load/Eject button 7 Micro Adjust 8 LF/FF button 9 Pause button 10 Pause light 11 Paper Out light Feeds continuous paper forward to the tear-off position. Feeds continuous paper backward from the tear-off position to the top-of-form position. Selects a cut-sheet feeder bin when it is installed. In default setting mode, selects a value. Both flash when continuous paper is in the tear-off position. Both off when continuous paper is not in the tear-off position or when bin 1 of the optional cut-sheet feeder is selected. Left light is on when Card mode is selected. Right light is on when bin 2 of the optional cut-sheet feeder is selected. When you press the Pitch (ItemU) and Tear Off/Bin (Set) buttons at the same time, the printer enters or exits default setting mode. See "Changing the Printer's Default Settings" on page 38. When the printer is in default setting mode, both menu lights are on. Loads a single sheet of paper. Ejects a single sheet of paper. Loads continuous paper from the standby position. Feeds continuous paper backward to the standby position if a sheet is loaded. When you hold down the Pause button for three seconds, the printer enters Micro Adjust mode. In this mode, you can press the LF/FF D and Load/Eject U buttons to adjust the top-of-form or tear-off position. See "Using the Micro Adjust Function" on page 31. Feeds paper line by line when pressed quickly. Ejects a single sheet or advances continuous paper to the next top-of-form position when held down. Stops printing temporarily, and resumes printing when pressed again. When held down for three seconds, enters Micro Adjust mode. When pressed again, exits Micro Adjust mode. On when the printer is paused. Flashes when the printer is in Micro Adjust mode. On when no paper is loaded in the selected paper source or paper is not loaded correctly. Flashes when paper has not been fully ejected or paper is jammed. 36 Using the Control Panel