Epson 2200 Start Here Card - Page 2
Put On the, Paper Support, Connect the Printer
UPC - 010343841840
View all Epson 2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
2 Remove all the blue tape and packing materials inside and around the printer. 2 Put On the Paper Support Insert the paper support into its slots behind the sheet feeder. (To install the roll paper holders, and automatic roll paper cutter and basket, see your Printer Basics book.) Paper support slots 3 Connect the Printer Printer connection cables are not included with your printer. You need only one of the following cables: • USB cable, or • Parallel cable (PC only), or • IEEE-1394 or FireWire™ cable. USB Cable Users 1 Shut down your computer. In Windows®, click Start and select your Shut Down or Turn Off option. Leave your computer turned off until section 7. 2 Plug the square end of the cable into your printer's USB port until it stops. 3 Plug the flat end of the cable into your computer's USB port until it stops. (You can use any open USB port.) Square end Flat end 4 Now plug in and turn on your printer, as described in section 4.