Epson 4000 Start Here Card - Page 3
Load Roll Paper, Release the paper lever. - power cleaning
UPC - 010343848337
View all Epson 4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Load Roll Paper 1 Slide the black paper stop off the end of the spindle. 2 If the paper has a 2-inch core, remove the adapters by pressing the four tabs. Note: Make sure your hands are clean, and avoid touching the printable surface of the paper. Try to handle paper by the edges. Make sure you don't rub or scratch the coating or dent the edges of the paper. 3 Position the roll so the paper unwinds as shown, then slide it onto the spindle. 4 Slide the black paper stop back onto the spindle. Insert it firmly into the end of the roll. 5 Open the roll paper cover. Roll paper cover 6 Place the paper and spindle in the printer as shown, with the gray end on the right. 7 Make sure the printer is powered on and ready. Press the Paper Source button until the or roll paper icon appears. 8 Release the paper lever. Paper Source button 9 Hold both sides of the paper and feed it into the slot until the paper is aligned with the OTHER mark and the vertical line on the paper tray cover. Then move the paper lever to the secured position. vertical line 10 Raise the roll paper support on top of the paper tray. Then close the roll paper cover. OTHER mark