Epson 4800 Quick Reference Guide - Page 9

Control Panel Messages Status messages These messages indicate normal phases of printer operation. Message READY PRINTING RESET PRESS PAUSE BUTTON PLEASE WAIT Light Pause light off Pause light flashing All lights flash briefly Pause light on Pause light flashing PAUSE Pause light on CUTTING CHARGING INK Explanation or response Printer is ready to print. Printer is receiving data. Printer is resetting. Press the Pause button to continue. Printer is initializing or performing maintenance. Wait until READY appears. Printer is paused. To resume printing, press the Pause button. Printer is cutting the paper. Printer is charging the ink delivery system. Wait until READY appears. Error messages For a complete list of error messages, see your Printer Guide. Message INK LOW INK OUT CHANGE PAPER TYPE Light Ink light flashing Ink light on Paper light on LOAD PAPER SET PAPER LEVER RELOAD PAPER Paper light on Paper light on MNT TNK FULL Ink light on Explanation Response Ink cartridge(s) are nearly empty (printing continues). Replace ink cartridge(s) indicated on LCD. See page 5. Ink cartridge(s) are empty (printing stops). Replace ink cartridge(s) indicated on LCD. See page 5. The paper source setting in print options is different from the control panel setting. Make sure the right paper is loaded and the paper source setting is the same on the control panel and print options. The paper lever is in the released position. Move the paper lever to the secured position. The printer cannot detect the paper. Make sure paper is loaded correctly and the paper lever is secured. If you're using cut sheets, make sure the paper is flat. The maintenance tank is full. Replace the maintenance tank. See page 7. Continue 8 ▲