Epson 4880 Quick Reference Guide - Page 6

Checking Ink Levels and Replacing Ink Cartridges Before you begin a large print job, you should check your ink levels. If one of your cartridges is low, you can replace it before you start. Or you can wait until the ink runs out, replace the cartridge, and then continue the job. Checking Ink Levels The easiest way to check ink levels is from the control panel. When one of the indicators is blank and REPLACE INK CRTG is displayed on the LCD panel, the cartridge is expended. To replace the cartridge, first make sure the printer is on. 1 Press the ink compartment cover to open it. 3sec. (full) 1 2 3 4 5 6 7 8 Menu (empty) 1 Photo Black/ Matte Black 2 Cyan 3 Vivid Magenta 8 Light Light Black 4 Yellow 7 Vivid Light Magenta 6 Light Cyan 5 Light Black 2 Raise the ink lever to the unlocked position. Replacing Ink Cartridges When the ink light flashes, one of the indicators is low, and INK LOW is displayed on the LCD panel, the corresponding cartridge is nearly expended. Make sure you have the correct replacement cartridge. You can install any combination of 110 ml and 220 ml cartridges. Epson UltraChrome K3TM withVivid Magenta ink 110 ml 220 ml Photo Black Cyan T605100 T606100 T605200 T606200 Vivid Magenta Yellow T605300 T606300 T605400 T606400 Light Cyan T605500 T606500 Vivid Light Magenta T605600 T606600 Light Black Light Light Black T605700 T606700 T605900 T606900 Matte Black T613800 T614800 3 Remove the expended ink cartridge from the printer. Warning: Do not shake the expended cartridge, or ink may leak. If ink gets on your hands, wash them thoroughly with soap and water. If ink gets in your eyes, flush them immediately with water. 4 Make sure the replacement cartridge is the correct color, and remove it from its package. Gently shake the cartridge before installing it. ▲ Continue 5