Epson 5040UBe Quick Setup - Page 2
Turn on your equipment, Using the remote control, Adjust the image - wirelesshd
View all Epson 5040UBe manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Turn on your equipment 1 Turn on your video source. 2 Plug in the projector. Using the remote control Install the batteries as shown (two AA batteries). 3 Press the power button on the projector or the On button on the remote control. The shutter opens and the power light flashes blue, then stays on. Note: To shut down the projector, press the power button on the projector or the Standby button on the remote control, then press the button again to confirm, if necessary. Wait for cooldown to complete before unplugging the projector. 4 Use the arrow buttons on the remote control to highlight any of the options on the Home screen that appears, then press Enter to select it. You can display a QR code, switch between projection sources, and quickly access various adjustment options from this screen. Turn projector on Choose which source to display Control connected sources with HDMI Link Adjust zoom, focus, and lens shift Access projector menus Turn projector off Turn off projector display Navigate projector menus Control WirelessHD functions For more information on using the remote control, see the online User's Guide. Adjust the image 1 Press the Pattern button on the remote control to display a test pattern. 5 The default language of the menu system is English. To select another language, press the Menu button on the projector or remote control. Select Extended and press Enter. Select Language and press Enter. Select your language and press Enter. Press the Menu button to exit the menu system. 2 To raise the image or correct a tilted image, adjust the front feet as shown below. 3 Press the Lens button on the remote control and use the and buttons to focus the image.