Epson 680Pro Product Information Guide - Page 7

EPSON LQ-680Pro State of panel lights n Paper Out n Pause Beep pattern ••• Problem Solution No paper is loaded in the selected paper source. Load paper in the printer. Then press the Pause button to turn off the Pause light, if necessary. ••• The paper is not loaded correctly. Remove your paper and reload it. Then press the Pause button to turn off the Pause light, if necessary. ••• Paper is jammed in the printer. f Paper Out n Pause Clear the paper jam as described on page 12. ••• Continuous paper is not fed back to the standby position. Tear off the printed document at the perforation; then press the Load/Eject button. The printer feeds the paper to the standby position. Press the Pause button to turn off the Pause light. ••• A single sheet of paper is not fully ejected. Press the Load/Eject button to eject the sheet. Then press the Pause button to turn off the Pause light, if necessary. ••• Paper is jammed in the printer. f Paper Out f Pause Clear the paper jam as described on page 12. ••• The printer was unable to switch between paper sources because of a paper jam or other paper problems. f Pause Remove any paper from the paper path and clear the paper jam as described on page 12. Then retry the paper source selection. - The print head has overheated. f Paper Out f Pause f f Tear Off Bin f f f Font Wait a few minutes; the printer resumes printing automatically once the print head cools. An unknown printer error has occurred. Turn off the printer and leave it off for several minutes; then turn on the printer again. If the error recurs, contact EPSON. n = on, f = flashing ••• = short series of beeps (three beeps long series of beeps (five beeps) The printer beeps once if you press a control panel button when the corresponding function is not available. Status Monitor The EPSON Status Monitor 3 utility comes with the printer but is available only for use with Windows 95, 98, 2000, or NT 4.0. It allows you to monitor your printer's status, alerts you when printer errors occur, and provides troubleshooting instructions. Selecting a Paper Source The printer can accommodate a variety of paper types through four paper sources: paper guide, tractor, optional cut-sheet feeder, or optional roll paper holder. The paper source you should select depends on the type of paper you want to use. The following table shows which paper source to use for each paper type. Paper type Continuous paper Continuous multipart forms Labels Single sheets Single-sheet multipart forms Envelopes Tractor N N N - - - Postcards - Roll paper - Paper source Paper guide Optional cut-sheet feeder - - - - Optional roll paper holder - - - - - N N - N N* - (bin 1 only) N N - (bin 1 only) N N - (bin 1 only) - - N N You can use this paper type with this paper source. - You cannot use this paper type with this paper source. * You can use only carbonless single-sheet multipart forms that are glued at the top of the forms. 11/00 EPSON LQ-680Pro - 7