Epson 680Pro User Manual - Page 10
Control Panel Buttons and Lights, Tear Off/Special Paper button LQ-680Pro - lq pause
UPC - 010343832138
View all Epson 680Pro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Control Panel Buttons and Lights n = On f = Flashing o = Off Font button Pause button Selects the font. Stops printing temporarily, and resumes printing when pressed Condensed button again. When pressed for three Turns on and off the condensed mode. seconds, turns on the *micro adjust mode. To turn off, press again. Reset When you press both the Font and Condensed buttons Pause light simultaneously, the printer clears its buffer and return to q On when the printer is paused. its default settings. q Flashes when the printer is in the *micro adjust mode. Tear Off/Bin button (LQ-680) q Advances continuous paper to the tear-off position. q Flashes when the print head has overheated. q Feeds continuous paper backward from the tear-off position to the top-of-form position. Paper Out light q Selects a cut-sheet feeder bin. q On when no paper is loaded q Turns on the card mode to print on postcards and envelopes. in the selected paper source or paper is not loaded Tear Off/Bin lights (LQ-680) correctly. q f f when continuous paper is in the tear-off position. q Flashes when paper has not q o n when bin 1 of the optional cut-sheet feeder is selected. been fully ejected or a q n o when bin 2 of the optional cut-sheet feeder is selected. paper jam has occurred. q n n when the printer is in the card mode. LQ-680 LQ-680Pro Paper Source button & lights (LQ-680Pro) Select a paper source. See Chapter 2. Tear Off/Special Paper button (LQ-680Pro) q Advances continuous paper to the tear-off position. q Feeds continuous paper backward from the tear-off position to the top-of-form position. q Turns on the card mode or envelope mode. Tear Off/Special Paper lights (LQ-680Pro) q f f when continuous paper is in the tear-off position. q o n when the printer is in the card mode. q n o when the printer is in the envelope mode. *Micro Adjust mode When you hold down the Pause button for three seconds, the printer enters the micro adjust mode. In this mode, you can press the LF/FFD and Load/EjectU buttons to adjust the top-of-form or tear-off position. See Chapter 2. LF/FF button q Feeds paper line by line when pressing shortly. q Ejects a single sheet or advances continuous paper to the next top-of-form position when held down. Load/Eject button q Loads a single sheet of paper. q Ejects a single sheet of paper if a sheet is loaded. q Loads continuous paper from the standby position. q Feeds continuous paper backward to the standby position.