Epson 680Pro User Manual - Page 95

Manual feed wait time This sets the amount of wait time between when paper is inserted into the paper guide and it is fed. If the paper feeds before you can adjust its position to your satisfaction, you can increase the wait time. Buzzer (beeper) The printer beeps when an error occurs. (See "Using the Error Indicators" on page 5-2 for more information on printer errors.) 4 If you do not want the printer to beep when an error occurs, turn this setting off. Overlapping forms (LQ-680Pro only) This setting takes effect only when the skip-over-perforation setting is on. When overlapping-forms setting is on, the printer lifts up the print head each time it makes a one-inch margin with the skip-over-perforation feature. You need to turn on both the overlapping-forms and the skip-over-perforation settings when you use overlapping forms. This setting is available only on LQ-680Pro. Changing default settings Follow the steps below to enter the default-setting mode and change the printer's default settings. Note: t To print the language selection and default-setting mode instructions, you need five sheets of A4 or letter size single-sheet paper, or five pages of continuous paper that is at least 279 mm (11 inches) long and 210 mm (8.27 inches) wide. t If you use single sheets without an optional cut-sheet feeder, you need to feed a new sheet of paper each time the printer ejects a printed sheet. Changing Printer Settings From the Printer's Control Panel 4-9