Epson 710C Product Information Guide - Page 3
Computer Connector Pin Assignments, Projector Placement Guidelines
UPC - 010343821538
View all Epson 710C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
EPSON PowerLite 500c/700c/710c Projector Computer Connector Pin Assignments The Computer port is a female video RGB, 15-pin micro-Dstyle connectors. The pin assignments are: Input pin Computer connector signals 1 Red video 2 Green video 3 Blue video 4 GND 5 GND 6 Red video GND 7 Green video GND 8 Blue video GND 9 Reserve 10 Synchronous GND 11 GND 12 SDA 13 Horizontal sync/composite sync 14 Vertical sync 15 SCL Projector Placement Guidelines t Place the projector on a sturdy, level surface, between 3.5 and 45 feet from the screen. t Make sure the projector is within 10 feet of a grounded electrical outlet or extension cord. t Place the computer and/or video source within 5 feet of the projector. t Make sure the projector is perpendicular to the screen. Otherwise, your image will be distorted. The distance from the projector to the screen determines the actual size of the projected image. Use the general guidelines in the table below to determine the proper distance. Image size (diagonal) Horizontal distance from projector to screen Minimum (lens set to W) Maximum (lens set to T) 2.2 feet (0.7 meter) - 2.5 feet (0.8 meter) 3.6 feet (1.1 meters) 3.3 feet (1.0 meter) 4.8 feet (1.5 meters) 5.0 feet (1.5 meters) 7.5 feet (2.3 meters) 6.7 feet (2.0 meters) 9.8 feet (3.0 meters) 8.3 feet (2.5 meters) 12.5 feet (3.8 meters) 12.5 feet (3.8 meters) 18.7 feet (5.7 meters) 16.7 feet (5.1 meters) 25.3 feet (7.7 meters) 25 feet (7.6 meters) 37.7 feet (11.5 meters) 3.6 feet (1.1 meters) 4.3 feet (1.3 meter) 5.6 feet (1.7 meters) 8.9 feet (2.7 meters) 11.8 feet (3.6 meters) 14.8 feet (4.5 meters) 22.6 feet (6.9 meters) 30.2 feet (9.2 meters) 45.3 feet (13.8 meters) 1/00 EPSON PowerLite 500c/700c/710c Projector - 3