Epson 935W Users Guide - Page 153
Solutions to Sound Problems, Related concepts, Related references, A/V Mute, Source Search
View all Epson 935W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 153 highlights
Related concepts Projector Lamp Maintenance Related references Input Signal Settings - Signal Menu Image Quality Settings - Image Menu Projector Feature Settings - Settings Menu Solutions to Sound Problems If there is no sound when you expect it or the volume is too low or high, try the following solutions: • Adjust the projector's volume settings. • Press the A/V Mute button on the remote control to resume video and audio if they were temporarily stopped. • Press the Source Search button to switch to the correct input source, if necessary. • Check your computer or video source to make sure the volume is turned up and the audio output is set for the correct source. • Check the audio cable connections between the projector and your video source. • Make sure any connected audio cables are labeled "No Resistance". • If you are using the USB Display function, turn on the Output audio from the projector setting in the Epson USB Display Settings program on your computer. • If Standby Audio is enabled (PowerLite 935W), the projector's fans may be louder than usual when the product wakes up from standby mode. The projector's fans should resume normal noise levels within 2 minutes. Parent topic: Solving Image or Sound Problems Solutions to Microphone Problems If there is no sound when you use a microphone connected to the projector (not available for PowerLite 92/93), try the following solutions: • Make sure the microphone is securely connected to the projector. • Adjust the Mic Input Level and Plug-in Power settings as necessary in the projector's menus. Parent topic: Solving Image or Sound Problems Related references Projector Feature Settings - Settings Menu 153