Epson 935W Users Guide - Page 42
Using the Projector on a Network, Wired Network Projection, EasyMP Monitor, Parent topic
View all Epson 935W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Using the Projector on a Network Follow the instructions in these sections to set up your projector for use on a network. Wired Network Projection Wireless Network Projection Setting Up Projector Network E-Mail Alerts Setting Up Monitoring Using SNMP Controlling a Networked Projector Using a Web Browser Crestron RoomView Support Wired Network Projection You can send images to your projector through a wired network (PowerLite 95/96W/905/915W/935W/1835). To do this, you connect the projector to your network, and then set up your projector and computer for network projection. Note: With the PowerLite 93, you can monitor projector operations over a wired network, but not project images over the network. After connecting and setting up the projector as described here, install the network software from the Epson Projector Software CD-ROM on your computer. Use the following software and documentation to set up, control, and monitor network projection: • EasyMP Network Projection software sets up your computer for network projection. See the EasyMP Network Projection Operation Guide for instructions. • EasyMP Monitor software (Windows only) lets you monitor and control your projector through the network. You can download the latest software and documentation from the Epson web site. Go to www.epson.com/support (U.S.) or www.epson.ca/support (Canada) and select your projector. Note: If your projector is connected via a LAN cable to a network that includes a wireless access point, you can connect to the projector wirelessly using the EasyMP Network Projection software. Connecting to a Wired Network Selecting Wired Network Settings Parent topic: Using the Projector on a Network 42