Epson ActionNote 4SLC2/50 User Manual - Page 116
Built-in Command Set, When to Issue Built-in Commands
View all Epson ActionNote 4SLC2/50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
Built-in Command Set If you are not using a telecommunications program, you can use the fax/modem's built-in command set. These commands are compatible with the Hayes® Smartmodem® series of modems. Note When you use a telecommunications software program like BitCom or WinFax LITE, it provides its own set of commands that control the fax/modem. You will normally use the program's commands instead of the built-in set. See your software manuals for instructions. You need the following information only if you are not using a telecommunications program. When to Issue Built-in Commands Your fax/modem has two operating states: command state and on-line state. The fax/modem must be in command state to receive commands from you; in on-line state, your keystrokes are passed directly to the telephone line. The fax/modem enters the command state when you: Turn on your computer Select the Reset command (ATZn) Place a call but are unable to make a connection Exit the on-line state using the escape sequence (+++). Fax/Modem B-3