Epson ActionNote 4SLC2/50 User Manual - Page 62

Connecting a Serial Device, COM 1

Get Epson ActionNote 4SLC2/50 PDF manuals and user guides View all Epson ActionNote 4SLC2/50 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 62 highlights

4. If the connector has retaining screws, tighten them by hand or with a screwdriver. 5. Connect the other end of the cable to the printer. If the printer interface has retaining clips, squeeze them gently until they snap into place. 6. Connect the printer's power cable to a grounded (earthed) electrical socket. Connecting a Serial Device You can use the COM 1 and/or COM 2 port to connect serial devices, such as a serial printer or plotter. You could also connect a modem or pointing device, such as a trackball or mouse. Note You cannot use the COM 2 port if the internal fax/modem is installed. Follow these steps to connect a serial device: 1. Make sure both computer and the serial device are off. Connecting Optional Devices 4-5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
4. If the connector has retaining screws, tighten them by hand or
with a screwdriver.
5.
Connect the other end of the cable to the printer. If the printer
interface has retaining clips, squeeze them gently until they
snap into place.
6. Connect the printer’s power cable to a grounded (earthed)
electrical socket.
Connecting a Serial Device
You can use the
COM 1
and/or COM 2 port to connect serial
devices, such as a serial printer or plotter. You could also connect a
modem or pointing device, such as a trackball or mouse.
Note
You cannot use the
COM 2
port if the internal fax/modem is
installed.
Follow these steps to connect a serial device:
1. Make sure both computer and the serial device are off.
Connecting Optional Devices 4-5