Epson ActionPrinter 4000X User Manual - Page 29
Testing the Printer, Plugging in the Printer, Running the Self Test
View all Epson ActionPrinter 4000X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Testing the Printer Now that your printer is fully assembled, you can use its built-in self test function to see that the printer is working correctly before you connect it to a computer. You should perform this test to make sure that your printer was not damaged during shipping and that the ribbon is correctly installed. Before running the self test, you need to connect the printer to an electrical outlet and load a sheet of paper. Plugging in the Printer 1. Make sure that the printer is turned off. 2. Plug the power cable into a properly grounded electrical outlet. Running the Self Test The self test can be run in the draft or Letter Quality mode, depending on which button you hold down as you turn on the printer. Setting Up the Printer 1-15