Epson C120 Quick Reference Guide - Page 19

Close the printer cover., ink button. The printer begins charging ink and

Page 19 highlights

9. Place the new ink cartridge into the cartridge holder and push it down until it clicks into place. 10. Once you replace any other cartridges that need replacing, close the ink cartridge cover and press it until it clicks into place. 11. Close the printer cover. 12. Press the H ink button. The printer begins charging ink and the P power light starts flashing. This takes about 1 1/2 minutes. When it's finished, the P power light stops flashing and remains on, and the H ink light goes out. Caution: Never turn off the printer while the P power light is flashing or you'll waste ink. If you removed a low or expended ink cartridge, you cannot reinstall and use the cartridge. Note: If the H ink light stays on (not flashing), the ink cartridge may not be installed correctly. Press the H ink button again and reinstall the ink cartridge until it clicks into place. Replacing Ink Cartridges 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

Replacing Ink Cartridges
19
9.
Place the new ink cartridge into the cartridge holder and push it down until it
clicks into place.
10.
Once you replace any other cartridges that need replacing, close the ink
cartridge cover and press it until it clicks into place.
11.
Close the printer cover.
12.
Press the
H
ink button. The printer begins charging ink and the
P
power
light starts flashing. This takes about 1 1/2 minutes. When it’s finished, the
P
power
light stops flashing and remains on, and the
H
ink light goes out.
Caution:
Never turn off the printer while the
P
power light is flashing or you’ll waste ink.
If you removed a low or expended ink cartridge, you cannot reinstall and use the
cartridge.
Note:
If the
H
ink light stays on (not flashing), the ink cartridge may not be installed
correctly. Press the
H
ink button again and reinstall the ink cartridge until it clicks
into place.