Epson C229001 User Manual - Page 144
Printing a Self Test, Off/Bin, Operate
View all Epson C229001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
3. As described in the instructions, compare the alignment patterns and select the pattern with the best alignment. Then select the pattern with the best alignment for each of the remaining sets of alignment patterns. 4. After you select the best pattern in the final set of alignment patterns and save your selection by pressing the Tear Off/Bin button, press the Operate button to turn off the printer and exit the bidirectional adjustment mode. Printing a Self Test Running the printer's self test helps you determine whether the printer or the computer is causing the problem: q If the self test results are satisfactory, the printer is working properly and the problem probably results from your printer driver settings, application settings, computer, or interface cable. (Be sure to use a shielded interface cable.) q If the self test does not print properly, there is a problem with the printer. See "Problems and Solutions" for possible causes and solutions to the problem. 7 You can print the self test using either single sheets or continuous paper. See Chapter 3 for instructions on loading continuous paper, or Chapter 4 for instructions on loading single sheets. Note: Use paper of at least the following width: Troubleshooting Paper type continuous paper single sheet FX-880 241 mm (9.5 inches) A4 or letter size FX-1180 376 mm (14.8 inches) A3 landscape Troubleshooting 7-15