Epson CX4200 Product Information Guide - Page 8

Epson Stylus CX4200 Series/Epson Stylus CX4800 Series 4. Press the Copy button until you see the desired number of copies in the Copy window. You can select up to 9 copies at a time this way. To make 10 or more copies, see the section to the right. 5. Press the paper type button to select Plain Paper. The light indicates which type is selected. 6. Press the paper size button to select Letter. 7. If you want your copies automatically reduced or enlarged to fit the loaded paper size, press the Fit to Page button. 8. To make a color copy, press the x Start Color button. To make a black and white copy, press the x Start B&W button. The P On light flashes and after a moment the Epson Stylus CX starts printing. If you need to stop copying at any time, just press the y Stop button. Do not pull out paper that is being printed; it will be ejected automatically to the output tray. Note: The copies may not be exactly the same size as the original. Copying a Photo 1. Make sure the Epson Stylus CX is turned on. 2. Place the photo on the glass as described on page 7. Be sure to close the document cover. 3. Load up to 20 sheets of letter-size, 4 × 6-inch, or 5 × 7-inch photo paper. (See page 4 if you need instructions.) 4. Press the Copy button until you see the correct number of copies in the Copy window. You can select up to 9 copies at a time this way. To make 10 or more copies, see the next section. 5. Press the paper type button to select Photo Paper. 6. Press the paper size button to select Letter, 4"x 6", or 5"x 7". 7. If you want borderless photos (printed without a white border), press the Fit to Page button. Otherwise, photos are printed with a .12-inch (3.0 mm) border. 8. To make a color copy, press the x Start Color button. To make a black and white copy, press the x Start B&W button. The P On light flashes and after a moment the Epson Stylus CX starts printing. If you need to stop copying at any time, just press the y Stop button. Do not pull out paper that is being printed; it will be ejected automatically to the output tray. Note: The copies may not be exactly the same size as the original. Making 10 or More Copies 1. Make sure the Epson Stylus CX is turned on. 2. Place the photo on the glass as described on page 7. Be sure to close the document cover. 3. Press the Copy button until you see "-" in the Copy window. This tells the Epson Stylus CX to print up to 100 copies. 4. Load enough paper for the number of copies (up to 100) you want to make. For example, to print 12 copies, load 12 sheets of paper. 5. Press the paper type button to select Plain Paper or Photo Paper. 6. Press the paper size button to select Letter, 4"x 6", or 5"x 7". 7. Press the x Start Color or x Start B&W button. The Epson Stylus CX makes copies until it runs out of paper. Then the red b Error light comes on. 8. To make more copies, load more paper and press the x Start Color or x Start B&W button to resume. If you don't need any more copies, press the y Stop button. Note: When making a lot of copies, it is a good idea to remove the printed copies from the output tray after every 10 sheets or so. Speeding Up Printing If you want to make a copy quickly, you can print a "draft" copy. The print quality is reduced, but the copy prints faster. 1. Load plain, letter-size paper and select Plain Paper and Letter size on the control panel. 2. Press and hold down the y Stop button, then press the x Start Color button (to copy in color) or the x Start B&W button (to copy in black and white). When the P On light starts flashing, release both buttons. You can return to regular printing after your draft print job finishes. 8 5/05