Epson ColorWorks C7500 ESC/label Command Reference Guide - Page 171
ESC/Label Command Reference Guide, Rev. E,
View all Epson ColorWorks C7500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 171 highlights
^JZ [Name] Set reprint after error [Format] ^JZ e Parameters Description Range e Enable/disable error e = Y/N reprinting function Y: Enabled N: Disabled [Function] Enables/disables reprinting for labels where printing was canceled due to an error. If error reprinting is enabled based on Parameter e, labels which were canceled due to an error will be reprinted once the printer recovers from the error. [Response] None [Reference] Related commands: None [Note] The ^JUS command is required to save settings to the non-volatile memory of the printer unit. Please refer to the "^JU" command section for details. [Usage example] An example of sending data that enables/disables reprinting for labels for which printing was canceled due to an error and saves settings to the non-volatile memory of the printer unit is shown below. ^XA ^JZY 1. Sets the reprinting for labels for which printing was canceled due to an error. ^JUS 2. Saves the setting to non-volatile memory. ^XZ ESC/Label Command Reference Guide Rev. E Page 171