Epson DS-560 User Manual - Page 38
Determining the Scanner's IP Address, Direct Wi-Fi Mode Setup - wireless setup
View all Epson DS-560 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
5. Do one of the following: • Under Search for addresses, select the IP address of your Network Interface Unit or scanner, and click OK. • Select the Enter address setting, type in the IP address or host name of your Network Interface Unit or scanner, and click OK. 6. Click the Test button to check the connection. You see a confirmation message. 7. Click OK to save your settings and close Epson Scan Settings. Determining the Scanner's IP Address Parent topic: Connecting to an Existing Wi-Fi Network Determining the Scanner's IP Address If you have multiple scanners on your network, you need to know the IP address of the scanner when setting up network scanning. 1. Do one of the following to start EpsonNet Config: • Windows 8.x: Navigate to the Apps screen and select EpsonNet Config. • Windows (other versions): Click or Start, and select All Programs or Programs. Select EpsonNet > EpsonNet Config > EpsonNet Config. • OS X: Open the Applications folder and select EPSON Software > EpsonNet > EpsonNet Config > EpsonNet Config. 2. Find your scanner in the list and write down the IP address. Parent topic: Setting Up Network Scanning Direct Wi-Fi Mode Setup You can set up your scanner to communicate directly with your computer or another device without requiring a wireless router or access point. If your product is not already connected to a wireless 38