Epson DS-560 User Manual - Page 80
Light status, Condition/solution, Status, Parent topic, Related references, Related topics - white light
View all Epson DS-560 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Light status The Status light is on The Status light is flashing blue The ! error light is on The ! error light and the Status light (blue) are flashing alternately The ! error light and the Status light are flashing at the same time The Status light is flashing white The ! error light and the Status light (white) are flashing alternately Condition/solution The scanner is turned on and ready to scan. The scanner is scanning or initializing. Wait for the Status light to stop flashing before turning off the scanner. An error has occurred. Try the following: • Check the scanner connection to your computer to make sure it is secure. • Make sure the scanner cover is closed and there is no jammed paper inside. • If the ! error light is still on, turn off the scanner, then turn it on again. If the error continues, the scanner may be malfunctioning. Contact Epson for support. The scanner firmware is updating. Do not turn off the scanner or disconnect any cables until the status lights have stopped flashing. A paper jam or a double feed has occurred. Remove any paper loaded in the input tray. If the lights continue to flash, a scanner error may have occurred. Turn the scanner off and then back on again. If the error continues, contact Epson for support. The scanner is connecting to a wireless network. The product is in a standby state for Wi-Fi Protected Setup (WPS) connection or the firmware is being updated. Parent topic: Solving Problems Related references Original Jams in Scanner Where to Get Help Related topics Loading Originals Scanning Wi-Fi Networking 80