Epson DS-70 Users Guide - Page 26
Direct Wi-Fi Mode Setup, Wi-Fi Protected Setup WPS, Enabling a Direct Wi-Fi Connection
View all Epson DS-70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
The scanner enters WPS discovery mode for two minutes. 5. Use your computer to enter the PIN code 01234565 into the WPS PIN number setting in the router firmware within two minutes. Note: If you do not enter the code within 2 minutes, repeat the steps to try again. Connection setup starts when the ready light flashes, and the Wi-Fi and Wi-Fi AP lights flash alternately. When the ready, is connected to the network. Wi-Fi, and Wi-Fi AP lights on the scanner stay on, the scanner Parent topic: Wi-Fi Protected Setup (WPS) Direct Wi-Fi Mode Setup You can set up your scanner to communicate directly with your computer or another device without requiring a wireless router. If your product is not already connected to a wireless network, it enters access point mode and the scanner itself acts as the network access point. 1 Epson scanner 2 Computer with a wireless interface 3 Other wireless device Enabling a Direct Wi-Fi Connection Disabling Wi-Fi Restoring Default Network Settings 26