Epson ELPDC02 User Manual - Page 19
Adjusting the Camera Head Switches
![]() |
View all Epson ELPDC02 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Adjusting the Camera Head Switches The gamma selection switch adjusts the output color to match the device connected to the RGB OUT port. Set the switch to OFF when connected to a projector or ON when connected to a monitor. The frequency selection switch is factory set to 60 Hz. In an area where power frequency is 50 Hz, set the switch to 50 to reduce flickering. gamma selection switch frequency selection switch Setting Up the Document Camera 13
![](/manual_guide/products/epson-elpdc02-high-resolution-document-imager-user-manual-f3e346f/19.png)
Setting Up the Document Camera
13
Adjusting the Camera Head Switches
The gamma selection switch adjusts the output color to match the
device connected to the
RGB OUT
port. Set the switch to
OFF
when
connected to a projector or
ON
when connected to a monitor.
The frequency selection switch is factory set to 60 Hz. In an area
where power frequency is 50 Hz, set the switch to
50
to reduce
flickering.
gamma
selection
switch
frequency
selection
switch