Epson ELPDC02 User Manual - Page 27
Adjusting the Image Position and Size, arrow buttons on
View all Epson ELPDC02 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Adjusting the Image Position and Size If you are displaying a computer image using the Video or S-Video output port, you can adjust its position and size. Remote control Position arrow buttons To adjust the image position, use the Position arrow buttons on the remote control. To adjust the image size, press and hold the Main button on the control panel. Then use the right and/or down Position arrow buttons on the remote control to enlarge the image. Use the up and/or left Position arrow buttons to reduce the image. Control panel note You can't adjust the position or size of an image captured with the overhead camera or an image output through the RGB video output port. Main The document camera will remember the position and size. If the signal frequency of the RGB1 or RGB2 port changes, however, you may need to readjust the position. Using the Document Camera 21