Epson ELPDC02 User Manual - Page 22
Turning On Your Equipment, Turning On the Document Camera
![]() |
View all Epson ELPDC02 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Turning On Your Equipment Make sure your document camera and other equipment are set up and connected correctly, as described in Chapter 1. Always turn on your projector or monitor first. Then turn on your document camera, as described below, followed by any other equipment you've connected to it. You can turn on your computer and video equipment in any order. If you have both a computer and video source connected, you may have to switch to the desired source to see its image as described on page 18. Turning On the Document Camera Follow these steps to plug in and turn on the document camera: 1. Connect one end of the power cord to the document camera's power inlet. f power inlet 2. Connect the other end to a grounded electrical outlet. 3. Turn on the projector or monitor. 16 Using the Document Camera
![](/manual_guide/products/epson-elpdc02-high-resolution-document-imager-user-manual-f3e346f/22.png)