Epson ELPDC06 For serial numbers beginning with N2JF User's Guide - Page 17

Appendix Solving Problems Problem No image appears The image is out of focus Solution Check that the USB cable is connected properly and that the power indicator is on. Make sure that the document (subject of the image) is not too close to the camera lens. The auto focus may not be able to focus in the following situations. Press the [Focus] button again. v Subject matter has low contrast between light and dark areas v Subject matter has repeated detailed patterns, such as horizontal stripes and checkered patterns v Image is dark overall v Subject matter has a bright background Problems with the ArcSoft Application software for ELPDC06 Error Message Solution The connection to your camera Make sure that the USB cable is connected securely, and was lost. then click the button again. The camera is not found. The camera is in use by another program or is not connected. Make sure that the camera is connected and working properly, then try again. If a webcam or device other than the unit is connected, disconnect it. The camera is not found or is not working properly. Please click Connect button and try again. Make sure that the USB cable is connected securely, and then click the button again. Where To Get Help If you notice any image problems or if you suspect the document camera is broken when installing or using it, stop using the unit. Contact the Epson service center that is indicated in the User's Guide supplied with the projector you are using with the document camera. 17