Epson ELPDC12 User Manual - Page 39
Saving Images
![]() |
View all Epson ELPDC12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Saving Images 39 Captured still images are stored in the internal memory, an SD card, or a USB drive. If there is more than one save destination, the priority is as follows: USB drive > SD card > the internal memory. If the save destination only has a small capacity remaining, the image is saved in the next destination. a Images are saved in JPEG format. a Insert an SD card face-up or connect a USB drive, if needed. a When you store images on a USB drive, make sure you set Function > USB Mode to Application. b Display the live camera image you want to save. Adjust any settings, as needed. c Press the [ ] button to capture the image. Press and release when you use the remote control, press and hold when you use the control panel. You see the displayed in the upper right of the screen, and the image is saved. a Using the control panel, if you press and release the button without holding it, the image is frozen on the screen instead of being saved in memory. d Repeat steps 2 and 3 for any additional images you want to save. a • If all of the save destinations only have a small capacity remaining, "The memory is full." is displayed and the image is not saved. • Do not disconnect the power cable from the document camera or remove an SD card or USB drive from the document camera while exporting data. Otherwise, the data may not be saved properly.
![](/manual_guide/products/epson-elpdc12-document-camera-9c7b375/39.png)