Epson EMP 70 Instruction Manual - Page 66
The Remote Control Does Not Operate, Cannot Switch off After Pressing the Power Button
UPC - 010343832619
View all Epson EMP 70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
The Remote Control Does Not Operate • Is the remote control R/C On Off switch set to On? See page 29 • Are you pointing the remote control in the correct direction for operation? See page 15 The range of operation is approximately 30° left or right and approximately 15° above or below the remote control sensor on the projector. • Is the remote control too far from the projector? See page 15 The operable distance is approximately 10m (393.70inches). • Is the remote control receiver on the projector blocked? • Is the remote control receiver in the path of direct sunlight or strong fluorescent light? • Are batteries in place? See page 16 • Are the batteries worn? See page 16 • Are the batteries inserted correctly? See page 16 Cannot Switch off (After Pressing the Power Button) • The operation display indicator remains a steady OFF orange. The operation display indicator of the projector is designed to remain lit even after power is switched off. When the plug is pulled out of the outlet, the operation display indicator will go out. • The fan does not stop. After the Power button is pressed and power is turned off, cool-down* begins. See page 74 After cool-down, the operation display indicator lights orange, and you should pull the plug out of the outlet. * Cool-down time varies depending on the external temperature and other factors. 64