Epson EMP 70 Instruction Manual - Page 70
Lamp Replacement, Replacement - user manual
UPC - 010343832619
View all Epson EMP 70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
7.2 Lamp Replacement Replace the lamp with a new lamp in the following instances. A replacement lamp is an optional part (sold separately). (Model No: ELPLP13) [When the following message is displayed for 30 seconds after projection begins: "Lamp Replace. After the replacement of the lamp, reset the lamp timer under the direction in the user's manual."] A message will be displayed. [When the problem/alarm display indicator flashes red at 1-second intervals.] Problem/alarm display indicator flashes red at 1-second intervals [When brightness or picture quality is inferior to its original state.] Point: • If the lamp does not light, replace it even if the lamp life has not expired. • To maintain the original brightness and picture quality, replace the lamp as soon as possible after a replacement message appears. • To maintain the original brightness and picture quality, replacement messages are set for approximately 1,400 hours. • Though a replacement message appears at approximately 1,400 hours, individual lamp characteristics or usage conditions may cause failure before 1,400 hours, and we recommend that a replacement lamp be kept on hand. • A replacement lamp can be purchased from your local Epson product vendor. Replacement Point: • Install the lamp securely. For safety, when the lamp cover is opened, the abnormal warning display indicator flashes red, and the projector lamp goes out. If the lamp or lamp cover is installed improperly, the lamp will not light. 68