Epson EMP 9100 Operation Guide - Page 21
Selecting display items, detected is stored until EMP Monitor is closed. The EMP Monitor
UPC - 010343836532
View all Epson EMP 9100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Monitoring window layout 20 Error information: Shows a notification or warning/problem status using the following icons. Clean Air Filter Notice Lamp Cover Open Replace Lamp*4 Lamp Error High-temperature warning Replace Air Filter Lamp failure at power on High internal temperature error No Air Filter Internal Error Low Air Flow Fan error Air Flow Sensor Err. Sensor error Low air flow error Other error Air filter air flow sensor error *1 When "Temperature level display group view" is set to "On" at "Environment setup" in the "Tool" menu, an icon indicating the internal temperature of the projector will be displayed on top of the projector icon. The default setting is "Off". *2 Check the following items. • Check that the projector's power is turned on. • Check that the LAN cable is connected. • Check that "Network Monitoring" is set to "ON" or "Standby Mode" is set to "Network ON" in the projector's configuration menu. *3 Check that the projector has been correctly connected to the network. *4 You can display the "Replace Lamp" warning at any time preset in "Environment setup" in the "Tool" menu. TIP The projector information that is generated when a problem is detected is stored until EMP Monitor is closed. The EMP Monitor displays will not be updated automatically even if the projector status returns to normal. Click [Refresh] in the main window to update the status. f Selecting display items You can select only the required items to be displayed in "Detail list view". PROCEDURE 1 Select "Option" from the "View" menu. The "Option" window will be displayed.