Epson EMP 9100 Operation Guide - Page 34
Troubleshooting, Projectors cannot be monitored or controlled
UPC - 010343836532
View all Epson EMP 9100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Troubleshooting 33 Projectors cannot be monitored or controlled Cause Remedy Is the projector connected to Connect the network cable correctly. the network correctly? s"Network Cable Connections" in the projector's User's Guide Has the projector been set Check the settings for the "Network" up correctly for connection configuration menu command. to the network? sProjector's User's Guide Has EMP Monitor been installed on the computer correctly? Are all the projectors that you want to control or monitor registered? Uninstall EMP Monitor and then re-install it. Register the projectors. sp.7 Is the projector's "Network Monitoring" or "Standby Mode" configuration menu set to "ON" or "Network ON"? In order to use EMP Monitor to monitor and control the projector when it is in standby mode, the projector's "Network Monitoring" or "Standby Mode" configuration menu must be set to "ON" or "Network ON". sProjector's User's Guide An e-mail message is not sent when a problem occurs with a projector Cause Remedy Is the projector connected to Connect the network cable correctly. the network correctly? s"Network Cable Connections" in the projector's User's Guide Has the projector been set Check the settings for the "Network" up correctly for connection configuration menu command. to the network? sProjector's User's Guide Have the SMTP server IP address, port number and recipient e-mail address all been set correctly? Check the setting details. Is the projector's "Network Monitoring" or "Standby Mode" configuration menu set to "ON" or "Network ON"? To use the mail notification function while the projector is in standby mode, set "Network Monitoring" or "Standby Mode" to "ON" or "Network ON" in the projector's configuration menus. sProjector's User's Guide Has a critical problem developed causing the projector to momentarily stop working? When the projector has momentarily stopped working, it cannot send e-mail messages. If the projector cannot be reset even after it has been checked, contact your dealer or the nearest address provided in the World-Wide Warranty Terms supplied with the projector. Is power being supplied to the projector? Check if the power supply to the location where the projector is set up has been interrupted, or if the circuit breaker for the electrical outlet that the projector is connected to has been tripped.