Epson EMP 9100 Operation Guide - Page 6

Operating environment 5 Compatible computers Macintosh computers cannot be used. OS Windows 98 Second Edition SP1/Me/NT.4.0 SP6/2000 Professional SP4/XP 32-bit versions (Home Edition/ Professional) SP1 and later/Vista 32-bit versions (Home Basic/Home Premium/Ultimate/Business/Enterprise Editions) • Internet Explorer Ver. 5.0 or later must be installed. CPU Pentium MMX 166 MHz or higher (Pentium II 233 MHz or higher recommended) Memory capacity 64 MB or more (128 MB or more recommended) Free hard disk 50 MB or more space Display SVGA (800×600) or higher resolution, 32 bit or higher display colour * Operations carried out at the computer may become slow depending on the number of projectors being managed. If this happens, use a computer with higher specifications. * EMP Monitor cannot be used in environments which do not allow pings to be transmitted. Installing EMP Monitor When you are using Windows2000/NT4.0/XP/Vista, you must have administrator authority in order to install EMP Monitor. PROCEDURE 1 Turn the computer on, and quit all running applications. 2 Place the "EPSON Projector Software for Monitoring" CD-ROM in the computer's CD-ROM drive. The installer automatically starts up. 3 From here, continue with the installation by following the on-screen messages. Limitations imposed by a Windows Vista environment When using EMP Monitor under Windows Vista, note the following limitations. • You must have administrator authority in order to use "Register at startup" on the "Environment setup" screen of EMP monitor. s"Monitoring using the system tray" p.22 • Even after EMP monitor has been uninstalled, the settings and log information will remain on the hard disk. If this information is no longer required, you may delete the "EMP Monitor V4.21" folder. Provided the default settings were used at installation, this folder can be found at: "C:\Users\(User Name)\AppData\Local\VirtualStore\Program Files\EPSON Projector\EMP Monitor V4.21"