Epson EMP-X3 User Manual - Page 43
Direct Power On, Sleep Mode, High Altitude Mode
View all Epson EMP-X3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
List of Functions 38 Sub-menu Operation Link 21L (EMP-X3 only) Standby Mode (EMP-82/62 only) COM Port (EMP-82/62 only) Language Reset Function Direct Power On: Sets whether direct power on is enabled ("On") or disabled ("Off"). When you set to "On" and leave the power cable connected to a wall socket, be aware of that sudden surges of electricity that may occur when power comes back on after a power outage may cause the projector to turn on automatically. Sleep Mode: Sets whether projection stops automatically ("On") or not ("Off") when no operations are carried out for approximately 30 minutes while no image signals are being input. High Altitude Mode: When using above an altitude of about 1500m, set to "On". Sets whether the EMP Link 21L utility software is being used or not. To enable the EMP Link 21L, turn the projector's power off and wait until the cool down period has finished. Set to "Network On" to use network monitoring and control functions and the standby monitor out function while the projector is in standby mode. If you change the setting, the new setting will be enabled after the power is turned off. •We provide softwares* for network monitoring and controlling projectors. •When set to "Network On", the Power indicator will flash orange and then remain orange after disconnecting the power plug and reinserting it into the electrical outlet. This can be set to either "RS-232C" or "USB", depending on the port that is being used for communication with a computer. If you change the setting, the new setting will be enabled after the power is turned off. Sets the language for message displays. Returns "Display" and "Operation" settings in the "Extended" menu (except for "High Altitude Mode") to their default settings. If you would like to return all menu items to their default, see "Reset All". sp.40 * EMP Monitor : Allows you to monitor multiple projectors on the network and control them all at once using functions such as turning the power on and off and switching input sources. For the detailed and current information about the software, please visit the following website. http://esupport.epson-europe.com/downloads/en/