Epson EPL-N1200 User Manual - Page 100
Continue, Paper Source, Mem Overflow, Reset, Overflow, Protect, Paper Jam, Paper Out, source size
View all Epson EPL-N1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
If you do not want to print in manual feed mode, press Continue. The printer loads the paper as instructed by the Paper Source setting. (For details on using manual feed mode, see Chapter 1.) Mem Overflow The printer has insufficient memory available for the current print job. To correct the error, press Continue. If the message remains, press Reset. You can also clear the error by turning the printer off and back on again. If you still receive a Mem Overflow error, it may be necessary to reduce the number or size of fonts, reduce the number or size of graphics, lower the resolution, or add more memory to the printer. If you add more memory and you still receive a Mem Overflow message, change the Page Protect setting in the printer driver; see Chapter 2 for details. (If you are using the Windows 3.1 EPSONScript driver, change the setting on the Control Panel as described in Chapter 3.) You can also add even more memory or print at 300 dpi instead of 600 dpi. Paper Jam Paper is jammed in the paper path. Open the printer cover and clear the jammed paper as described on page 6-8. The jammed page's print data is then automatically reprinted. Paper Out source size There is no paper in the indicated paper source. Load paper of the indicated size into the printer and press Continue. 6-4 Troubleshooting