Epson EPL-N1200 User Manual - Page 108
The position of the printout on the is incorrect.
View all Epson EPL-N1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
The font selected in your software won't print correctly. The selected font is not supported by your printer; see the Introduction or the Technical Information manual for more information. If Image Optimum is set to Auto or On, fonts may be changed to increase print speed. Set Image Optimum to Off in the printer driver or the SelecType Config menu; see Chapters 2 and 3 for details. The output is garbled or printed as asterisks (*). If you use the Remote Control Panel, check whether any settings have been changed by another user; see the Technical Information manual for details. Make sure that both ends of the interface cable are plugged in securely. Also be sure you use a double-shielded, twisted-pair parallel interface cable no longer than six feet in length for Parallel B; no longer than 30 feet in length for Parallel C. If you are using an optional serial interface, set the parity, baud rate, number of data bits, and number of stop bits to match your computer; see your computer manual for details. The emulation setting for that port may not be correct. Specify the emulation mode with SelecType (see Chapter 3) or the Remote Control Panel utility (see the Technical Information manual). If the printer still does not print correctly, contact your dealer or an authorized EPSON Customer Care Center. The position of the printout on the page is incorrect. Make sure you are using the correct page length and margin settings in your application program. 6-12 Troubleshooting